Download Print this page

Troubleshooting; On-Screen Messages - Sony SDM-H246W Operating Instructions Manual

Tft lcd color computer display

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 29

Troubleshooting

Before contacting technical support, refer to this section.

On-screen messages

If there is something wrong with the input signal, one of the
following messages appears on the screen. To solve the problem,
see "Trouble symptoms and remedies" on page 24.
If "Out Of Range" appears on the screen
This indicates that the input signal is not supported by the
monitor's specifications. Check the following items.
For more information about on-screen messages, see "Trouble
symptoms and remedies" on page 24.
If "xxx.x kHz / xxx Hz" is displayed
This indicates that either the horizontal or vertical frequency
is not supported by the monitor's specifications.
The figures indicate the horizontal and vertical frequencies of
the current input signal.
I n f o r ma t i o n
Ou t O f R a n g e
XXX . X k H z /
If "Resolution i 1920 × 1200" is displayed
This indicates that the resolution is not supported by the
monitor's specifications (1,920 × 1,200 or less).
I n f o r ma t i o n
Ou t O f R a n g e
R e s o l u t i o n >
DVI-D
XXXH z
DVI-D
1 2 0 X 1
9
2
0
0
If "No Input Signal" appears on the screen
This indicates that no signal is being input via the currently
selected connector.
When Input Sensing (page 20) is set to Auto On, the monitor finds
another input signal and changes the input automatically.
I n f o r ma t i o n
N o
I n p u t S i g n a l
Go T o P o w e r S a v e
Go To Power Save
The monitor will enter the power saving mode after about 5
seconds from the time the message is displayed.
If "Cable Disconnected" appears on the screen
This indicates that the video signal cable has been disconnected
from the currently selected connector.
When Input Sensing (page 20) is set to Auto On, the monitor finds
another input signal and changes the input automatically.
I n f o r ma t i o n
C a b l e D i s c o n n e c t e d
Go T o P o w e r S a v e
Go To Power Save
The monitor will enter the power saving mode after about 45
seconds from the time the message is displayed.
23
(GB)
DVI-D
DVI-D

Advertisement

loading