Unimig P1004 Operating Manual page 8

-Connect the breathing hose between the welding helmet and the P1004 blower, FIGURE 4. Check
that the breathing tube is securely fastened.
NOTE: If the breathing tube is broken, please replace it.
Carefully observe the instructions that explain how the equipment is to be used, before taking it into
service.
All components must be installed/ used in accordance with this manual if the equipment is to offer
the specified protection. If any component is missing, or if anything is not clear, contact the supplier.
Markings on the battery (see FIGURE 5).
8
Figure 4
Figure 5