Connecting The Switch To The Network - HPE Aruba 2930F 24G Setup Manual And Safety/Regulatory Information

Connecting the switch to the network

1. (Optional) Connect an RJ-45 console cable (included) and/or a micro-USB console cable
(not included) to a VT-100 terminal or a PC (running suitable terminal emulation software).
NOTE:
For more information, see the information on connecting a management console in the
Aruba 2930F Switches Installation and Getting Started Guide.
2. (Optional) Insert transceivers.
If both cables are connected, input is accepted only from the Micro USB connector.
Connecting the switch to the network 7