HPE Aruba 2930F 24G Setup Manual And Safety/Regulatory Information page 5

5 PoE Mode Selected LED (Only on Aruba 2930F models that support
PoE+ operation): Off after self-test in default configuration.
6 User Mode Selected: Off after self-test in default configuration.
4. Remove the power cord from the switch and the power source.
Mounting Aruba 2930F 24-Port and 48-Port switches
Supported mounting options for the Aruba 2930F 24-Port and 48-Port switches include:
Rack mount
Tabletop or desktop mount
IMPORTANT:
is not supported.
Two-post rack mounting option:
NOTE: For the four-post rack-mount option, see the Aruba 2930F Switches Installation and
Getting Started Guide at www.hpe.com/networking/ResourceCenter.
1. Use a #1 Phillips (cross-head) screwdriver to attach the accessory kit brackets to the switch
using the eight 8–mm M4 screws.
2
2. Use the four number 12–24 screws to secure the brackets to the rack.
Wall-mounting or under-table mounting Aruba 2930F 24G and 48G switches
1
1
Mounting Aruba 2930F 24-Port and 48-Port switches
2
5