Setup Reset Menu; Network Lan Menu - Optoma 4K500 User Manual

USING THE PROJECTOR
Information Hide
Enable this function to hide the information message.
‡ Offe: Choose "On" to hide the info message.
‡ One: Choose "Off" to show the "searching" message.
Logo
Use this function to set the desired startup screen. If changes are made, they will take effect the next time the
projector is powered on.
‡ Defaulte: The default startup screen.
‡ Neutrale: Logo is not displayed on startup screen.
Background Color
Use this function to display a blue, red, green, grey color, or none when no signal is available.
HDMI 2 Setting
Configure the HDCP2.2-compatible HDMI 2 connector settings.
‡ EDID 1: For 480i/p, 576i/p, 720p, 1080i/p, or 2160p input signal.
‡ EDID 2: For non-interlaced signals only.
HDMI 1 EQ/ HDMI 2 EQ/ HDMI3 EQ
Set the HDMI1/ HDMI2/ HDMI3 port EQ value.
Detail Filter
Apply detail filter between 0, 1, and 2.

Setup reset menu

Reset OSD
Return the factory default settings for OSD menu settings.
Reset to Default
Return the factory default settings for Setup menu settings.

Network LAN menu

Network Status
Display the network connection status (read-only).
MAC Address
Display the MAC address (read-only).
DHCP
Use this option to enable or disable the DHCP function.
‡ On: Projector will obtain an IP address automatically from your network.
‡ Off: To assign IP, subnet mask, gateway, and DNS configuration manually.
Notee: Exiting OSD will automatically apply the entered values.
IP Address
Display the IP address.
Subnet Mask
Display subnet mask number.
37
English