Image Consists Of A Few Dots Only; Line Of Dots Appears In All Scanned Images - Epson ET-2650 User Manual

Image is Distorted or Blurry
Image Colors are Patchy at the Edges
Image is Too Dark
Back of Original Image Appears in Scanned Image
Ripple Patterns Appear in an Image
Image is Scanned Upside-Down
Scanned Image Colors Do Not Match Original Colors
Scan Area is Not Adjustable in Thumbnail Preview
Scanned Image Edges are Cropped
Parent topic:

Image Consists of a Few Dots Only

If your scanned image consists only of a few dots, try these solutions:
• Make sure you placed your original for scanning facing the correct way.
• If you are scanning using the Epson Scan 2 Black & White setting, adjust the Threshold setting and
scan again.
Parent topic:
Related references
Additional Scanning Settings - Main Settings Tab
Related tasks
Placing Originals on the Scanner Glass

Line of Dots Appears in All Scanned Images

If a line of dots appears in all your scanned images, clean the scanner glass with a soft, dry, lint-free
cloth or use a small amount of glass cleaner on the cloth, if necessary. Paper towels are not
recommended.
Caution: Do not spray glass cleaner directly on the scanner glass.
Parent topic:
Related tasks
Cleaning Your Product
Solving Problems
Solving Scanned Image Quality Problems
Solving Scanned Image Quality Problems
176