Page 17
CONTENTS ..........Introduction .............. 1 Function ....... 2 Pusher Button and LCD Display ............3 Selecting Mode ............4 Time 5.1....... 4 Selecting Display Time 5.2......... 4 Setting Time and Date ..........5 Stopwatch 6.1..........5 Stopwatch 6.2.
1. Introduction We thank you for purchasing our 10 laps wrist watch and please read this operation instruction to know the functions, the way of operation and the safety information of our product. This is a multi-functional watch combines time, calendar, recording lap data, timer, alarm, and also stopwatch function.
4. Selecting Mode This is a multi-functional watch, so you must select corresponding mode before Week using the function. Date U n d e r t h e n o r m a l Hour Minute circumstance, our watch Second i s i n t h e t i m e m o d e a n d displaying time, date and week.
Note: The watch will return to time mode without button pressing after 1 minute, except from the watch in stopwatch mode and timer mode. 5. Time 5.1. Selecting display time Our watch has dual time function and identifying with T1/T2. In the time mode, press button until T1 (or T2) stop flashing, begin to displaying T1/T2.
Setting Hour Turn on/off Key Tone Setting Date Setting Minute Setting Month Clear Second 12/24 Hour Format Setting Year 6. Stopwatch There is a hundredths timer with 1% second stopwatch in our watch. The maximum time period of the stopwatch is 99 hours59 minutes 59 seconds.
Stopwatch Cleared Stopwatch Run Stopwatch Stop Press button to clear the data when the stopwatch in the stop status. 6.2. Lap time When running or racing on the track, you can use lap time to record the time of each track. Our watch can record 10 lap time and the operating method just as the following: 1)In the stopwatch mode, press button...
3)Just as the above mentioned, press button to record more than one lap time at the end of each lap. 4)At the end of each lap, press button to begin to run stopwatch, and press button once again to stop stopwatch.
Note: In the data mode, press button to bac k to the stopwatch mode. 6.4. Lap Time Data Delete When the stopwatch stop, select to the data mode (see chapter 4), press button until the watch begin displaying , it means the lap time data has been deleted.
Timer Mode Setting Hour Setting Minute Setting Second 7.2. Using Timer After finishing setting the initial countdown time, press button to begin countdown timer, and press button once again can stop countdown timer, press button one more again can continue countdown timer. In the status of stopping countdown, press button Can back to the initial countdown timer.
Note: Our watch will auto-begin countdown timer from 99 hour 59 minutes and 59 seconds if there is no setting the initial countdown time. Note: If you do not stop timer, the timer will continue to run until countdown to zero even if exit the timer mode.
1)Selecting to the alarm mode (see chapter 4), In the alarm mode (see chapter 4), press button to select hourly chime, T1/T2 2)Press button to turn on/off hourly chime and alarm. Hourly Chime Turn on Hourly Chime Turn off Alarm of T1 Turn on Alarm of T1 Turn off Alarm of T2 Turn on Alarm of T2...
Button Unlocked Button Locked (not displaying (displaying 10.Turn on EL backlight Apart from the setting status and the button locked, press button can turn on EL backlight and the backlight last about 3 seconds. 11. Water resistance Our watch can waterproof for 30 meters.It is no problems to wearing our watch while daily grooming or raining, but not swimming, diving or sauna, or operating any button under the water.
Note: Our watch consists of precision electric parts, please do not attempt to remove or rough wearing. Note: Please do not wear our watch in the environment of severely cold, extremely hot, temperature changing rapidly. Note: Please do not wear our watch in the environment with strong magnetic or strong electric.
Need help?
Do you have a question about the M-008-1 Leisure Outdoor Series and is the answer not in the manual?
Questions and answers