Firmware Updating Procedure; Firmware Upgrade - Usb - Toshiba 26EL834G Service Manual

FIRMWARE UPDATING PROCEDURE

Firmware Upgrade - USB

1. Copy a firmware BIN file to USB disk. (Root directory)
2. Plug USB disk into TV USB port.
3. Reboot (AC Off/On) TV to upgrade firmware automatically. During firmware upgrade, OSD will be displayed on LCD screen, and power status LED will be blinking.
4. When firmware upgrade is finished, a message will be displayed on screen.
5. Unplug USB disk, and turn AC Off/On to reboot TV.
Note:
This upgrade method is available only when boot code exists in flash memory (Main Board).
Print this page