Firmware Updating Procedure; Firmware Upgrade - Usb - Toshiba 40LV933G Service Manual

TOSHIBA

FIRMWARE UPDATING PROCEDURE

Firmware Upgrade - USB

USB upgrade flow
1. Firmware upgrade.
Copy a Firmware BIN file to USB disk (root directory) with FAT 32.
For example the naming as below.
xx_xV_xL_DB_933x_022_REV00.bin, shall have difference version of firmware number
show on red.
2. Plug USB disk into TV USB port.
3. IR key MENU → SETUP → Software Upgrade → USB Upgrade.
During F/W upgrade will display percent on the screen when is finished will shown a
message on LCD screen then unplug USB disk. TV will auto reset and power on again.
Note:
Not allow copy more then 1 versions of firmware in USB disk.
TOSHIBA WEB-ZEUS
file://D:\Documents and Settings\Admin\Рабочий стол\TOSHIBA 40LV933G\40LV...
>> terms and conditions >> privacy policy
Copyright © 1995-2011 TOSHIBA Corporation, All Rights Reserved.
Стр. 1 из 1
Print this page
20.04.2015