Started - Redx Sapphire I Owner's Manual

Getting Started
Getting

Started

7. Turn on the power switch of amplifier. Verify that the POWER LED
lights.
8. Turn up both level controls slowly on the amplifier (Stereo Mode).
Then, music is heard and signal LEDs in blue color.
If the signal LEDs are flashing in red color, turn down either the level
controls on the amplifier or the sourcing signal's output level controls,
until the signal LEDs are no longer flashing and returned back to blue
color .
9. For better listening, it is recommended to adjust the amplifier level
controls rather than the sources signal output level.
10