Using the SCXI-1127
Operating as a Multiplexer/Scanner
© National Instruments Corporation
This chapter discusses in detail the operation of the SCXI-1127. There are
two major modes of operation—operation as a multiplexer and operation
as a matrix. A third mode of operation, independent mode, allows you to
access advanced features of the SCXI-1127.
You can configure the SCXI-1127 to operate as a multiplexer/scanner.
Using this mode of operation, you can configure channels in the scan in
three different ways—two-wire, one-wire, and/or four-wire channel
configurations. In all scanning modes, only one channel is closed at a time
in the multiplexer.
2-1
2
SCXI-1127 User Manual