Installing The Hardware; Installing The Scxi-1127 Module Into The Scxi Chassis; Figure 1-1. Installing The Scxi-1127 Into An Scxi Chassis - NI SCXI-1127 User Manual

Installing the Hardware

Installing the SCXI-1127 Module into the SCXI Chassis

10
1 AB0+
2 AB0-
3 NI 4060 for PCI
© National Instruments Corporation
The following section describes how to install your SCXI-1127 for use
with SCXI chassis, National Instruments DAQ devices, and National
Instruments DMMs.
You need the following items to complete the installation:
• SCXI-1127
• SCXI chassis
• 1/8 in. flathead screwdriver
Follow these steps to install your SCXI-1127 module into the SCXI chassis
while referring to Figure 1-1.
9
8
7
4 AB2+
5 AB2-
6 HV8-BAN4
7 SH9MD-9MD

Figure 1-1. Installing the SCXI-1127 into an SCXI Chassis

Chapter 1 Installing and Configuring the SCXI-1127
8 2-Slot HVAB-Backplane
9 SCXI Chassis
10 SCXI-1127 Module
1-3
1
5
6
Adapter
SCXI-1127 User Manual
2
3
4