Create Static Routes - TP-Link TD-W9977 User Manual

Chapter 11
Done!
11 6

Create Static Routes

A static route is a pre-determined path that network information must travel to reach
a specific host or network. Data from one point to another will always follow the same
path regardless of other considerations. Normal Internet usage does not require this
setting to be configured.
I want to:
How can I
do that?
Now your working devices connected to LAN1 and LAN3 are in
an isolated group!
Note: VLAN function is enabled by default. You cannot disable it when IPTV
is enabled.
Visit multiple networks and multiple servers at the same time.
For example, in a small office, my PC can surf the Internet, but I
also want to visit my company's server. Now I have a switch and
another router. I connect the devices as shown in the following
figure so that the physical connection between my PC and my
company's server is achieved. To surf the Internet and visit my
company's network at the same time, I need to configure the
static routing.
LAN: 192.168.1.1
1 Make sure the routers use different LAN IP addresses on the
same subnet. Disable Router 2's DHCP function.
2 Visit http://tplinkmodem.net, and log in with the password
you set for the modem router.
3 Go to Advanced >
current WAN Interface
Specify Your Network Settings
Modem router
Router 2
WAN: 172.30.30.100
LAN: 192.168.1.2
Switch
My PC
192.168.1.100
Network > Advanced
and click Save.
Company's server
172.30.30.1
Routing. Select your
55