Table of Contents
Advertisement
Chapter 4
4
Select your WAN Interface Name
(Edit) icon.
5
Scroll down the page, enable IPv6, and configure the IPv6 parameters.
Addressing Type:
SLAAC is the most commonly used addressing type.
IPv6 Gateway:
Note: If your ISP has provided the IPv6 address, click
specified by ISP and enter the parameters provided by your ISP.
6
Click
OK
to make the settings effective. Now IPv6 service is available for your
network.
4 5
Wireless Router Mode
The modem router supports two operation modes: DSL Modem Router Mode and
Wireless Router mode. The modem router uses the DSL Modem Router Mode by
default, but you can change the mode if needed.
For example, if you already have a modem or your Internet comes via an Ethernet jack
on the wall, you can set up the modem router as a regular wireless router to share the
Internet.
1
Find the WAN port (labeled as "WAN" or "LAN4/WAN") on the modem router, and
connect it to your existing modem or the Ethernet jack on the wall. Then connect
the power adapter and turn on the modem router. If you connect an existing modem,
reboot it to get the modem router connected to the Internet.
(Status
Consult your ISP for the addressing type, DHCPv6 or SLAAC.
Keep the default setting as
Set Up Internet Connections
should be Connected) and click the
Current
Connection.
Advanced
to reveal more settings. Check to use IPv6
14
Hide quick links:
Advertisement
Table of Contents
