Table of Contents
Advertisement
Connection Instructions
◘ Connect the power cord ACC (red) to the ignition switch.
◘ Connect BATT (yellow) to the circuitry of storage cell of your vehicle.
◘ Connect the reverse wire (blue) to the reverse switch or the circuitry of the
reversing light (applicable to 12V).
◘ Connect to the antenna and the control wire of power amplifier.
◘ Lead various video signals to video input jack.
◘ Connect the speaker to the output wire of power amplifier.
◘ Plug the antenna into the antenna socket of this unit.
◘ Check if all the connections are correct.
◘ Put all the wires in order for installation.
Note: Blue/black wires are for detecting parking; they are valid when
grounded, otherwise, you will only have sound but without pictures.
Advertisement
Table of Contents
