Table of Contents
Advertisement
screen won't turn blue if there is no signal. If the function is set to be "ON", the screen will
turn blue if there is no signal.
☆
When displaying a menu, even if the function of blue screen is OFF, the screen will
be in blue automatically.
C. Key Sound
If this function is switched ON, there will be sound when pressing a key. Switch OFF
this function to clear the sound when pressing a key.
Volume adjustment
Monitor OFF
☆ Rotate the knob on the panel to increase or decrease the volume. Adjusted values are
shown on the screen of the panel.
☆ Hold the volume control button on the remote controller to continuously adjust the
volume. Continuously changing values will be shown on the screen of the panel.
Sequentially press the sound menu key to cycle through volume adjustment, bass
adjustment, treble adjustment, L/R balance adjustment, front and rear balance adjustment
and cancel menu monitor.
A. Volume adjustment
☆ Press the knob or "SOUND" once to bring up the volume adjustment menu.
☆ Rotate the knob on the panel to increase or decrease the volume. Volume values will
be shown on the screen of the panel.
☆ You can use the sound-adjusting button on the remote controller to adjust volume.
Advertisement
Table of Contents
