Table of Contents
Advertisement
Setup Menu
When playing AV, CD-C (DVD) or TV, double press "MENU" key, the screen will
display as shown in the following picture. Press "
blue, bell and tune; Press "
☆ Highlighted item is the parameter being adjusted, flashing item is the virtual value
which will go into effect when the menu disappears. You cannot use the mirror
function when the menu is monitoring.
☆ When each parameter is adjusted to its proper value, if you don't use any key within 3
seconds, the menu will be hidden automatically and each adjusted value will be
stored. All the adjusted values will be automatically loaded next time when you
start the unit.
A. Mirror
☆ Mirror is only for AV2 (reversing camera).
☆ When entering AV2 (reversing camera), whether to mirror or not depends on the
mirror setup in the menu.
B. Blue (valid for TV only)
☆ In watching and tuning TV, if the function of blue screen is set to be "OFF", the
OR
" key to adjust the above parameters.
OR
" key to sequentially select mirror,
Advertisement
Table of Contents
