Vectronix BT PLRF25C User Manual page 56

• DAGR Targeting Operations:
1. Conduct a combined measurement with
data transfer, see page 26.
2. Upon receipt of LRF SHOT RECEIVED
dialog, review/evaluate Azimuth, Range,
and Elevation Angle. The DAGR will
allow the operator to show a total of
three shots at one time. Once the oper-
ator determines that he has a good
targeting solution he will highlight the
desired shot and: Press ENTER to
continue to FIRE SUPPORT pages or
Press QUIT to discard shot without
creating a waypoint.
Options
3. Check all data in the SAFETY CHECKS
fields and ensure that no fields on the
Fire Support Pages are blinking
between grey and black text (indicates
that calculation is based on invalid fix).
4. To store the target location as a LRF
Waypoint, highlight the STORED AS
WP field, then push the ENTER key.
DAGR highlights the first available
unused waypoint or highlight the desired
waypoint, then push the ENTER key.
Edit Name, Remark, or Identity Type of
waypoint if required.
56
PLRF25C-1.2en