Results - Vectronix BT PLRF25C User Manual

Results

The calibration result is
displayed at the end of the
procedure.
indicates a
GOOD
successful calibration.
If the result is
BAD
a 12 point calibration until a
is obtained. Consider
GOOD
to move to an alternative
location.
PLRF25C-1.2en
Magnetic interferences can
still lead to inaccurate
measurements, even if the
calibration was successful.
For this reason the
, perform compass accuracy should
be verified after a
successful calibration by
performing several azimuth
measurements on known
landmarks and compare the
results.
Possible causes of calibra-
tion failures:
• the device was moved
• movements were
• the location is to close to
33
while
HOLD POS
displayed.
performed to fast or
jerkily.
magnetic disturber.
Compass calibration
was