Megapix DWC-MB45DIA User Manual page 25

Setup-
Network
Network Setting
[Static IP / Dynamic IP]
select "Static IP" or "Dynamic IP". For the use of the dynamic IP, the router that supports DHCP should be on
the local network.
[IP Address / Subnet Mask / Gateway / Default DNS]
set the value that is appropriate to the network (ask the network administrator for the proper network
values.)
Web setting page (Network)
IPv4 Link Local Network Setting
- This function enables you not to set the IP address of the cameras in case that you use the NVR that
supports the "IPv4 Link Local Network" function.
[Enable] check the box for the activation (default: Enable)
[IP Address, Subnet Mask] These are set automatically.
IPv6 Network Setting
[Enable] check the box for the activation (default: Enable)
[IPv6 Address, Gateway] set the value that is appropriate to the network (ask the network administrator for
the proper network values.) The number next to "/" on IPv6 Address means the setting value for the sub-
network.
[IPv6 LinkLocal] This is set automatically by the communication between the local network devices.