Install Remote Control Batteries - Philips PET712/05 User Manual

• To connect power from inside a car:
Connect the car adaptor cable to the
DC IN jack of the main unit and to the
car cigarette lighter socket.
Car Cigarette Lighter Socket Car Cigarette Lighter Socket
• To connect power from household
power sources: Connect the AC adaptor
cable to the DC IN jack of the main unit
and to the power outlet.

Install remote control batteries

Caution
•
Risk of explosion! Keep batteries away from heat, sunshine
or fire. Never discard batteries in fire.
•
Risk of decreased battery life! Never mix different brands
or types of batteries.
•
Risk of product damage! When the remote control is not
used for long periods, remove the batteries.
•
Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
For first-time use:
1
Remove the protective tab to activate the
remote control batteries.
To replace the remote control batteries:
1
Open the battery compartment.
2
Insert 1 CR2025 3V lithium battery batteries
with correct polarity (+/-) as indicated.
3
Close the battery compartment.