Current Status (2 Of 3); Current Status (3 Of 3); Configuration Menus; Genlock - RF Central RFX-HD-D Operator's Manual

*Note: The following video formats are provided
−
1080i 50Hz
−
1080i 60Hz (29.97Hz)
−
720p 60Hz (59.94Hz)
−
720p 50Hz
−
480i 60Hz (29.97Hz)
−
576i 50Hz (25Hz)

5.3.2 Current Status (2 of 3)

From the summary screen, further screens are accessed with the ▼ key. The following configurations
are displayed
−
Analog audio outputs 1, 2, 3, 4 – Shows the current offset from the nominal 0dB
−
Digital video output connectors DV1 and DV2 – Shows the current output setting SDI or ASI
−
Genlock input status (enabled or disabled)
−
Genlock input type SD or HD

5.3.3 Current Status (3 of 3)

From the summary screen, further screens are accessed with the ▼ key. The following transport
stream PIDs are displayed
−
Program map PID
−
Clock ref PID
−
Video map PID
−
Audio 1 PID
−
Audio 2 PID
5.4

Configuration Menus

Press the "Menu" button to configure the unit. The ▲▼ buttons are used to select the required sub-
menus. The O button is then used to allow changes to be made.
5.4.1

Genlock

The ▲▼ buttons are used to select the parameter. The ► button changes the value. The O confirms
the selection. The following parameters may be set
Genlock status – Enable/Disable
Genlock reference type – SD Composite black sync or HD Tri-level sync
Genlock timing offset – H
Genlock timing offset - V
RFX-HD-D
Operator's Manual
Last Rev: July 2008
RF ExtremeCare: 866.732.0113
10