Kemar KSB-200 Instruction Manual page 53

Basic Operation Steps
1. Press [ON/OFF] to run the blender.
2. Press one of the program symbols of the left sideto select the desired
mode for your ingredients.
3. Press [ON/OFF] to start blending.
4. Machine stops working automatically when blending finished.
Attention: No matter which mode you choose for ingredients, when
start blending, the rotating speed will start on pre-programmed setting
from low speed; During blending process, the blender will automatically
shift/switch rotating speed to momentary high speed or low speed as
per different ingredients. Please be noted.
important:
If the ingredients can not be blended, please check:
- Whether the water is enough you put into the container
- Whether the size of fruits or vegetables is too large
53