Kemar KSB-200 Instruction Manual page 45

Integrated Safety Functions
Overheating protection
The motor of the Blender is equipped with a tempera-
ture control. If the motor or the blades turn too slowly
due to too solid foods or too little fluid, there is a dan-
ger of overheating. If the motor should switch off for
that reason, the overheating protection of the Blender
is activated.
Let Blender cool off for about 45 minutes in a well-venti-
lated area, afterwards you can use the Blender as usual.
Even before run-in water, the motor is safely protected.
Auto Stop for Mixing Container
The sensor for the mixing container recognizes if the
container has been set up correctly.
If the container is not, or has not been placed correctly,
the Blender will not turn on.
If the device is turned on and you remove the Container
from the motor unit, the power turns off immediately.
If you put the container back, the unit switches to
standby mode.
45