Kemar KSB-200 Instruction Manual page 50

Two-Part Lid
The two-piece lid is simple to set up, and to clean. Always use the lid and
the closure cap when the device is in operation.
Position the lid on the container with the lid flaps midway between the
spout and the handle. Push the lid onto the container until it locks into
place. The lid must always be secured when processing, especially when
blending hot liquids that may scald.
never operate the blender without checking to make sure that
the lid is securely locked in place!
To Remove the Lid: Lift up on one lid flap, while holding the
container securely.
Lid Cap
50
To Remove the Lid Cap Rotate the lid cap anti-clockwise
from the "locked" to the "unlocked" position and lift out.
Remove the cap when you want to use the Tamper or
adding ingredients.