Safety Instructions - Harley Benton GA-212 R Owner's Manual

Introduction
Congratulations on your purchase of our guitar combo amp. With your GA 212 R
you can easily perform your music with great tone. This model provides high
quality sound with a range of useful features. To achieve the best performance
and safety operation, you must read all of this manual before using it in a live
situation.
Power: 120 watt RMS
X
X 2 separate channels
X CD/Line input
X Insert & FX Send/Return jacks
Footswitchable gain boost
X

Safety instructions

For your own safety you must read this section in full first!
Risk of electrical shock.
• Connect the device only to a properly wired and earthed electrical wall
socket providing the mains voltage indicated in this manual.
• Never manipulate the power cord or the plug. If a power cord is provided
with an earth lead, this is mandatory to ensure safe operation!
• NEVER operate the device if the power plug or the power cord is damaged.
• NEVER submerse the device in water. Wipe it only with a slightly damp
cloth. Liquid getting into the amp will risk a short circuit and will be
hazardous.
• NEVER expose the device to direct precipitation or moisture and never use it
in a damp or wet environment.
• Ensure that the power cord does not become wet during operation.
• Do not subject the amp to high temperatures, direct sunlight, severe
vibrations, shocks or tremors, or excessive dust.
• You must NEVER open the housing of the device or try to repair it. There
are no user serviceable parts inside and you face the risk of electric shock.
Warranty will become void if you open the housing.
• Do not place objects containing fluids, e.g. flower vases or beer bottles, on
or near the device.
• Notice regarding power disconnection
To completely disconnect the device from the mains power source the power
plug must be removed from the power socket. For this reason the device
should be placed in a position where a constant unobstructed access to the
power socket is assured, thus in an emergency situation you are able to
immediately pull out the power plug. To eliminate the risk of fire you should
completely disconnect the power plug from the power socket when the
device is not going to be used.
2