Sony Cyber-shot DSC-T300 Instruction Manual page 174

134
Warning indicators and messages
Invalid operation
• You have touched the panel when using
the digital zoom or Close focus enabled
mode. While using these modes, you
cannot focus by touching the screen.
Unable to detect face for retouch
• You may not be able to retouch the
image depending on the image.
(fll
(Vibration warning indicator)
• Camera shake may occur due to
insufficient light. Use the flash, tum on
the anti-blur function, or mount the
camera on a tripod to secure the camera.
640(Fine) is not available
• [640(Fine)] size movies can be recorded
only using a "Memory Stick PRO Duo".
Insert a "Memory Stick PRO Duo" or
set the image size to a size other than
[640(Fine)].
Macro is invalid
• The macro is unavailable under the
current settings (page 43).
Flash settings cannot be changed
• The flash is unavailable under the
current settings (page 43).
Zoom disabled
• [Digital Zoom] is set to [Off] when you
are shooting in
~Q
(Close focus
enabled) mode. Or, you are trying to use
[Smart] in [Digital Zoom] when the
image size is set to [10M], [3:2(8M)] or
[16:9(7M)] (page 90).
Maximum number of
images already selected
• Up to 100 files can be selected when
using [Multiple Images].
• Up to 999 files can be selected when
using [All Images in Date Range], [All
In This Folder] or [All In Favorites].
• Up to 999 files can be registered as
Favorites, and you can add
DPOF
or
C>n
marks to up to 999 files.
Cancel the selection.
low battery power
• When copying a image recorded in the
internal memory to the "Memory Stick
Duo", use a fully charged battery.
Printer busy
Paper error
No paper
Ink error
low ink
Noink
• Check the printer.
Printer error
• Check the printer.
• Check if the image you want to print is
corrupted.
• The data transmission to the printer may
not be completed yet. Do not disconnect
the cable for multi-use terminal.
Processing...
• The printer is canceling the current print
job. You cannot print until it is finished.
This may take time, depending on the
printer.