Sony Cyber-shot DSC-T300 Instruction Manual page 119

Painting or putting stamps on still images (Paint)
To stamp
CD
Touch
<J .
®
Touch the stamp select button, the desired stamp, then [OK].
®
Put stamps on the image.
To add a frame
CD
Touch
(B).
®
Select the desired frame with
~/~,
then touch [OK].
To make corrections
Touch. ' then rub the part you want to erase using the paint pen. Otherwise, touch
Q
to
revert to the previous state (if you touch
Q
again, it returns to the latest state).
• You can select the thickness of the eraser in the same way as you do for the pen, using the thickness select
button. The selected thickness is applied to both the line and eraser.
Erasing all painting
CD
Touch~.
®
Touch [OK].
All painting will disappear from the image.
Touch [Cancel] to cancel the operation.
To save the painting
CD
Touch etJ/~.
®
Select the image size to be saved from [VGA] or [3M], then touch [OK].
The painted image is recorded in the recording folder as a new file.
Touch [Cancel] to cancel the operation.
To exit paint mode
CD
Touch
X.
®
Touch [OK].
Touch [Cancel] to cancel the operation.
•
79