Enabling/Disabling The Anti-Theft Protection - Spectra Precision SP60 GNSS User Manual

set a base or start a standalone, static, post-processing
session.
Keeping this box disabled means users will not be
prompted.
Users may enable or disable anti-theft protection at
any time through Survey > Anti-Theft.
– Enable (startup protection): This button allows you to
enable the startup protection.
Before you enable the startup protection, please read
the currently active password shown in plain on the
screen. This is to make sure you will keep it in mind
(you'll need it to be allowed to use the receiver next
time you turn it on). After the startup protection has
been enabled, the Enable button turns into a Disable
button.

Enabling/Disabling the Anti-Theft Protection

After you have set the receiver's Anti-Theft tab to meet your
requirements, go to the Survey menu and then select one of
the following functions:
• Anti-Theft: This function shows the current status of the
anti-theft protection (Enabled, Disabled or Alarm Raised). It
can be used to enable or disable the protection at any
time.
You need to enter the password previously defined on the
Anti-Theft tab before you are allowed to disable the anti-
theft protection. If the theft alarm has been raised, you
can only disable the anti-theft protection.
• Start Survey: When you use this function to set an RTK
base, and provided the Prompt to enable Anti-Theft box has
been enabled, the anti-theft protection will be enabled
automatically. (A message will warn you that the
protection has been activated and information will be
given to tell you how to disable it.)
Later the protection will be disabled automatically when
you use the End Survey function.
• Start Recording: When you use this function to start data
recording, and provided the Prompt to enable Anti-Theft box
has been enabled, the anti-theft protection will be
enabled automatically. (A message will warn you that the
protection has been activated and information will be
given to tell you how to disable it.)
Later the protection will be disabled automatically when
you use the Stop Recording function.
33