Download Print this page

bioMerieux mini VIDAS Simplified User Manual

Hide thumbs Also See for mini VIDAS:

Need help?

Do you have a question about the mini VIDAS and is the answer not in the manual?

Page 1 GCS / IMMUNOASSAYS SIMPLIFIED USER GUIDE VIDAS ® mini 2010/02/01...
Page 2 ● If the lot does not feature in the list, HOW TO KNOW IF A CALIBRATION IS VALID? the lot has not been calibrated: To do this, proceed as follows: Press three times to return to the and follow the protocol on page 4 Press until the is displayed...
Page 3 Read the protocole barcode As soon as the message disappears, printed on last page of the remove the card and support package insert with the Press to return to the barcode wand Then calibrate using the protocol below HOW TO RUN STANDARDS (S) AND CONTROLS (C) Select Confirm to Quit FOR CALIBRATION?
Page 4 Select control, Enter the Sample ID (see below) and, if necessary, type the dilution factor then press Press After identifying the last patient, press until the work Repeat this operation list for the section is displayed, then start running for each control used the samples using the protocol below for the test Sample identification...
Page 5 - cleaning of the reagent strip area - performing VIDAS QCV test - cleaning of the two optical lenses bioMérieux S.A. 69280 Marcy l’Etoile France Tel.: 33 (0)4 78 87 20 00 Fax: 33 (0)4 78 87 20 90 www.biomerieux.com...