Box Contents; English - Denon X1800 Prime User Manual

User Guide (English)
Introduction
Features:
•
4-channel digital mixer with (4) phono/line switchable channels
•
BPM FX section with frequency-controlled band isolation
•
Dual USB audio connections for software and audio devices
•
Dedicated Sweep and BPM FX knobs—high-quality effects for each channel with a single
knob turn
•
Expressive EQ—choose Classic or Isolation modes and an adjustable filter resonance control
•
Engine Connect protocol for beatgrid-locked FX
•
Expressive Denon DJ Flex-Fader crossfader
•
Connect MIDI-based effects and instruments
•
24-bit/96kHz digital output for uncompromised audio quality
•
Crisp OLED screen for precise menu-based adjustments
•
(4) digital inputs for high-resolution audio mixing
•
LAN hub for up to four players or accessories
•
Rugged metal construction

Box Contents

X1800 Prime
USB Cable
Power Cable
Support
For the latest information about this product (documentation, technical specifications, system
requirements, compatibility information, etc.) and product registration, visit denondj.com.
For additional product support, visit denondj.com/support.
Setup
1. Make sure all of your devices are powered off or all of their volume levels are at their
minimum positions.
2. Connect your media players' audio outputs to the inputs of X1800 Prime.
3. If you are using SC5000 Prime units, connect their Link ports to X1800 Prime's Link ports
according to one of the following connection diagram examples.
4. Connect any other devices (turntables, headphones, power amplifiers, loudspeakers, etc.)
to the inputs or outputs of X1800 Prime.
5. Connect all of your devices to power sources.
When starting a session, power on (1) your media players and other input sources, (2) X1800
Prime, and then (3) output devices.
When ending a session, power off (1) output devices, (2) X1800 Prime, and then (3) your media
players and other input sources.
2
User Guide
Safety & Warranty Manual