Download Print this page

Advertisement

Quick Links

•.
4 ]\)t 'lOOn
THE GAS
CONSUMERS'
COUNCIL
(GCC) IS AN INDEPENDENT
ORGANISATION WHICH PROTECTS
THE INTEREST OF GAS
USERS.
IF YOU NEED
ADVICE,
YOU WILL
FIND THE TELEPHONE NUMBER IN
YOUR LOCAL TELEPHONE
DIRECTORY UNDER
GAS.
NILLEY
ROBINSO
RIVI ERA
A
GC No. 32-170-23
AND
BE LVE
0
E RE
GC No. 32-170-24
A
Cat
II
G20 at 20mbar convertible to G31 at
37mbar.
2H3P
For use in GB
and
lE.
Users Instructions
THIS LEAFLET IS INTENDED TO HELP YOU
UNDERSTAND
AND
USE YOUR NEW
FIRE EFFICIENTLY.
PLEASE READ THESE INSTRUCTIONS BEFORE
USING
THE
FIRE
AND
KEEP FOR
FUTURE REFERENCE.
57568

Advertisement

loading
Need help?

Need help?

Do you have a question about the RIVIERA and is the answer not in the manual?

Questions and answers

Summary of Contents for Robinson Willey RIVIERA

  • Page 1 •. 4 ]\)t 'lOOn THE GAS CONSUMERS' COUNCIL (GCC) IS AN INDEPENDENT ORGANISATION WHICH PROTECTS THE INTEREST OF GAS USERS. IF YOU NEED ADVICE, YOU WILL FIND THE TELEPHONE NUMBER IN YOUR LOCAL TELEPHONE DIRECTORY UNDER GAS. NILLEY ROBINSO RIVI ERA GC No.
  • Page 2 TRIMS FENDERSi .•. Available in Black with Brass or Chrome effect insert ~ig.4X Available in Brass or Chrome effect Both the above are available in black/brass or black/chrome effect 57568...
  • Page 3 The appliance name and serial number are on the data badge which is located on the left hand side of the fire base panel. Remove the fender and ash-pan cover for access to read the data badge. (See Figs 1and This fire must be installed and serviced regularly in accordance with the Gas...
  • Page 4 • TO LIGHT OPERATE:-' WARNING: If the flames are found to be extinguished and the control is not in the OFF position, the control knob should be returned to the OFF position and no attempt should be made to light the gas until at least 3 minutes have elapsed.
  • Page 5 wITIif~ :",,~' LIGHTING In the unlikely event of failure of the ignition spark the fire can be with taper long spill. Remove the ash-pan and fender. should be able to see the pilot burner just below the coal bed to the left centre (see 4.).
  • Page 6 ..•..•. CLEANING AND SIMPLE MAIN'l-ENANCE Generally the fire will only need dusting. Any painted surface or metal part should be cleaned with a damp cloth only. Never use abrasive materials or metal polish on painted surfaces or metal parts. Should soot accumulation become...
  • Page 7 Fit the trim to the fire by hooking it overthe top of the firebox top. Refer to Fig The bottom of the trim is held in place with magnets. Push the bottom of the trim at each side onto the magnets.
  • Page 8 Place 4 rectangular coals onto the base coal with their decorative faces visible. They should have the front end touching the back of the fender or inline with Refer to Fig Place the 3 remaining rectangular coals resting in the just created and leaning back to rest on the rear coal.
  • Page 9 NOTEPAD •• ><.~ '" 57568...
  • Page 10 .1l< For spares and service apply to your local supplier or installer stating that the appliance is a RIVIERA or BELVEDERE. The appliance Product code and Serial number are marked on the data badge on the left hand side of the base panel (remove the fender and ash-pan cover).

This manual is also suitable for:

32-170-23 aBelvedere32-170-24 a