How To Upgrade - Urive CLASSIC User Manual

10. Upgrade -Auto upgrade
[ How to upgrade automatically ]
1.# With the PC Viewer, you can automatically install the upgrade file in the memory card. Insert a micro SD card into a PC, and
then press button at the upper left of main screen of Viewer. (If a micro SD card having firmware version information is
inserted, a prompt of new firmware is shown as in ① ).
2.# Make sure you select correct drive letter of micro SD card; press the Update button; and format the micro SD card according
to the instruction. (For the format process, refer to "11. PC Viewer – Format SD.")
When the update is finished, a prompt pops up as in ④ and the update file (MD9300P.bin) is copied to the micro SD card.
3.#
4.# After turn the device off, insert the micro SD card to the body.
5.# After turn the device on, it is automatically upgrade with voice information(Starting the update) and then it will reboot by itself.
6.# In the SD card, some set folders are created after rebooting.
1 2 3 4
Urive Classic ... 29 ... User's Guide
5