Touch Calibration Operation; Adjusting The Touch Panel; Screen Setting Operation; Adjusting Brightness - Alpine IVX-W200E Owner's Manual

Touch Correction Setting
[Touch Correction] is selected on the Display setup menu in
step 3. Refer to "Display Setup Operation".

Adjusting the Touch Panel

Adjustment becomes necessary when the display
position on the LCD and the touch position on the touch
panel do not match.
Setting item: Touch Correction
Setting contents: / Reset
[ + ]
1. Touch the title bar of Screen Alignment.
The adjustment screen appears.
2. Accurately touch the [ + ] mark provided in the
lower left corner of the screen.
The screen changes to the adjustment screen.
3. Accurately touch the [ + ] mark provided in the
upper right corner of the screen.
This completes adjustment, and returns to the
Display Setup mode screen.
If you have touched a location other than the
•
touch [Cancel] to restore the adjustment screen to the
initial setting.
If you touch [Cancel] on the adjustment screen, no
•
adjustment is done and the Display Setup screen is
restored.

Screen Setting Operation

[Screen Setting] is selected on the Display setup menu in
step 3. Refer to "Display Setup Operation".

Adjusting Brightness

Setting item: Brightness
Setting content: -6 to +6 (Initial setting: 0)
You can adjust the brightness between MIN (-6) and MAX(+6).

Adjusting Contrast

Setting item: Contrast
Setting content: -6 to +6 (Initial setting: 0)
You can adjust the contrast between MIN (-6) and MAX(+6).

Adjusting Tint

Setting item: Tint
Setting content: -6 to +6 (Initial setting: 0)
You can adjust the Tint between MIN (-6) and MAX(+6).

Adjusting Saturation

Setting item: Saturation
Setting content: -6 to +6 (Initial setting: 0)
You can adjust the saturation between MIN (-6) and MAX(+6).
Setting item: Sharpness
Setting content: -6 to +6 (Initial setting: -5)
You can adjust the sharpness between MIN (-6) and MAX(+6).
mark,
[ + ]
23

Adjusting Sharpness