Functions - Tait TM8000 Service Manual

How many beeps are announced in each transmission period. If this value is set to
Beep Count
zero, the beep pattern is repeated endlessly during the transmission, or during the
TX tail time if
Adjustable between 0 and 255

Functions

Opens a window which displays the raw serial communications from the TA2922
Debug
board.
Opens the real time monitor window. When 'Start' is clicked in the real time
Monitor
monitor window, the real time states of the TA2922 analogue and digital lines are
displayed.
Note that the audio level monitor is an approximate guide only and only applies
to line out (receiver) audio. Indicates audio level to +/- 3dB in the range of
-10dBm and +6dBm.
Reads the data from a TA2922 board and displays in the window of the PGM-UIS
Read
application. Note that if the
switched on and then the data written before the Powerup Serial Timer expires.
Writes the data displayed in the window to the TA2922 board. Note that if the
Write
Powerup Serial Timer
written before the Powerup Serial Timer expires.
TA2922 Universal Line Interface Service Manual
© Tait Electronics Limited March 2010
Only During Tail is checked.
Powerup Serial Timer
is enabled, the radio must be switched on and then the data
is enabled, the radio must be
45