Programmable I/O Form, Audio Tab; Ptt Form, External Ptt (1) Tab - Tait TM8000 Service Manual

If line interface enable/disable control is needed, set the following:
Pin Direction
IOP_GPIO4 Output

Programmable I/O form, Audio tab

Rx/PTT Type Tap In
Rx None
EPTT1 T5

PTT form, External PTT (1) tab

Field
Advanced EPTT1
40
Label Action
DISABLE F1 Key Status
Tap In Type Tap In Unmute
A-Bypass In On PTT
A-Bypass In On PTT
PTT Transmission Type
Audio Source
Active Debounce Signal State
Low None Latching
Tap Out Tap Out Type Tap Out Unmute
R7 D - Split
None C-Bypass Out
Voice
Audio Tap In
TA2922 Universal Line Interface Service Manual
© Tait Electronics Limited March 2010
Mirrored
None
Busy Detect
On PTT
Setting