Tire Changing Tool; Spare Tire Nut Lock (If Equipped) - Suzuki GRAND VITARA 2008 Owner's Manual

Jacking Instructions: 5
EMERGENCY SERVICE

Tire Changing Tool

The jack, wheel brace and jack handle are
stowed in the rear left corner of the lug-
gage compartment. Remove the cover to
access the tools.
To remove the jack, turn its shaft counter-
clockwise and pull the jack out of the stor-
age bracket. To stow the jack, place it in
the storage bracket and turn the shaft
clockwise until the jack is securely held in
place.
WARNING
The tire changing tools should be
used only to change wheels. It is
important to read the jacking instruc-
tions in this section before attempt-
ing to use the jack.
8-1
WARNING
After using the tire changing tools,
be sure to stow them securely, or
they could be thrown about in an
accident, causing injury.
64J124
Spare Tire Nut Lock
(if equipped)
To UNLOCK
To LOCK
A nut lock is used for the spare tire. To
unlock the spare tire nut, insert the ignition
key into the lock as far as the key will go
and remove the lock with the key in. To lock
the spare tire nut, put the lock on the nut
and push the lock in.
78KS0-37E
64J172