Table of Contents
Advertisement
OTHER CONTROLS AND EQUIPMENT
3) Continue to lift up the hood until it is
high enough to support with the prop
rod.
To close the engine hood:
1) Lift the hood up slightly and remove the
prop rod from the hole. Put the prop rod
back to the holding clip.
2) Lower the hood close to the bumper,
then let it drop down.
Make sure the hood is securely latched
after closing.
WARNING
Make sure the hood is fully closed
and latched before driving. If it is not,
it can fly up unexpectedly during
driving, obstructing your view and
resulting in an accident.
5-51
Sun Visor
64J112
The sun visors can be pulled down to block
glare coming through the windshield, or
they can be unhooked and turned to the
side to block glare coming through the side
window.
CAUTION
When unhooking and hooking a sun
visor, be sure to handle it by the hard
plastic parts or the sun visor can be
damaged.
Interior Light Switch
Center
EXAMPLE
(3)
(2)
(1)
79J161
Rear
(3)
(2)
(1)
This light switch has three positions which
function as described below:
64J104
64J211
78KS0-37E
Advertisement
Table of Contents
