Summary of Contents for Auralex Acoustics Elite Pro System EPS-112T
Page 1
Use the EPS-112T alone for treatment of small to medium-sized rooms or in combination with other Auralex products for full control of larger spaces. Auralex Total Sound Control Thank you for Purchasing ® ® Products! Elite Pro System EPS-112T Components B22 ProPanels CT45 Bass Traps Impaling Clips ™ ™ Tubetak Pro ™...
Page 2
Elite Pro System EPS-112T General Information Recommended Additional Installation Materials • Power Drill • Carpenters Level • Pencil • Straight Edge • Nail Set B22 ProPanel Installation Guide ➊ Mark intended location of each B22 ProPanel on the wall or ceiling.
Page 3
CT45 Bass Trap Installation Guide ➊ Mark a vertical line 16.75” from the intended placement corner on both sides. 16.75” ➌ While continuing to hold panel in place, install one finish nail though the fabric face and the hardened edge of the CT45. Do not hammer nail completely flush with the face of the panel.
Page 4
Elite Pro System Installations See the Auralex Acoustics website, www.auralex.com, for more information ® about these and other Total Sound Control products. ® These are general recommendations. Should you have any additional questions about the installation of your Elite Pro System, feel free to contact an Auralex Application Specialist...
Need help?
Do you have a question about the Elite Pro System EPS-112T and is the answer not in the manual?
Questions and answers