Data Logging - LaMotte DC1500-CL Manual

7. Press
language. The screen will
momentarily display, Storing...
for about 1 second and return
tot the Editing Menu.
NOTE: If the meter unintentionally switches to another language, use the
procedure above to reset the meter to the desired language. For example, to
reset the meter to English:
1. Turn the meter on.
2. Press
3. Press
4. Press
ENTER

DATA LOGGING

NOTE: Data from the data logger must be retrieved in the same language in
which it was collected.
The meter will log the last 500 data points. The counter in the center bottom
of the display will show how many tests have been logged. The display will
show 500+ when the data logger has exceeded 500 points and the data points
are being overwritten. The meter will log the following data: test name, test
result, time of test and date of test. The data logger is password protected
and can only be accessed by authorized users.
1. Press and briefly hold
turn the meter on. The LaMotte
logo screen will appear for about
3 seconds and the Main Menu
will appear.
lobalScientificSupply
to select desired
ENTER
once. Press
ENTER
five times. Press
.
.com
Set Clock
Logging
Factory Setup
Set PWR Save
12:00:00
.
.
ENTER
to
Testing Menu
Editing Menu
Run PC Link
12:00:00
21
GLOBAL SCIENTIFIC SUPPLY
The Laboratory Supply Company!
Editing Menu
001/500
Main Menu
001/500
sales@GlobalScientificSupp