NC-link NC-AP212 User Manual page 5

4) After login, then P6 will be showed:
P6: Device Status
3rd ： Quickly Configure CPE
1 ) G a t e w a y M o d e c o n f i g u r a t i o n
A. Login the Web management page, click "Gateway Mode", then you can start configure "Gateway Mode"
P7 Gateway Mode
WAN Access Type: Dynamic IP or PPPOE(ADSL)
a).Dynamic IP:
①. If your access type is Dynamic IP, then you can get the IP address from the ISP. It means you only need connect
the ISP line with internet to the router's WAN port, needn't configure.