NC-link NC-AP212 User Manual page 20

We recommend the AP signal strength is greater than
-75dBm, if signal strength weaker, CPE's bridge effect
will be worse. In the condition of non-line-of-sight, the
bridge effect will be worse also, adjust the CPE direction
Indicator
to get better signal strength and Link Quality
h) PC Setting
Set PC's Internet TPC/IP as Obtain an IP address automatically, then
the PC can obtain the IP address assigned by Wireless AP or WLAN station
After setting finished, input Ping command to test internet connectivity.
5. Gateway Operation Mode
P20 Set PC's IP Address
19
www.nc-link.cn