NC-link NC-AP212 User Manual page 12

Change the parameter you want to (SSID and Pas sword for
example). Then cl ic k Save & Apply.
4. Repeater Operation Mode
Repeater: CPE's LAN Port, WAN Port and Wi-Fi will bridge together, CPE will
broadcast an SSID outward simultaneously. Users access into CPE through LAN
port or Wi-Fi, then get the IP address from AP or WLAN station.
The CPE's default operation mode is AP Mode, the two
RJ45 ports are LAN ports and PoE port under this
Instruction
mode.
www.nc-link.cn
11