Advertisement
Quick Links
Advertisement
Related Manuals for Harley Benton BOD-1
Summary of Contents for Harley Benton BOD-1
- Page 1 BOD-1 effects pedal user manual...
- Page 2 Musikhaus Thomann e.K. Treppendorf 30 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 30.03.2012...
-
Page 3: Table Of Contents
Table of contents Table of contents General notes............................... 4 Safety instructions............................. 6 Features............................... 10 Instructions for use..........................11 Components and functions........................ 12 Technical specifications........................17 Protecting the environment......................18 BOD-1... -
Page 4: General Notes
General notes General notes This user manual contains important information on safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to other users, be sure that they also receive this manual. - Page 5 NOTICE! This combination of symbol and signal word indicates a possible dangerous situation that can result in material and environmental damage if it is not avoided. Warning signs Type of danger Warning – danger zone. BOD-1...
-
Page 6: Safety Instructions
Safety instructions Safety instructions Intended use This device is intended to be used for sound processing of signals from musical instruments with electromagnetic pickups. Any other use or use under other operating conditions is con‐ sidered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use. - Page 7 Never let children unattended use electrical devices. NOTICE! Operating conditions This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and strong vibrations. BOD-1...
- Page 8 Safety instructions NOTICE! External power supply The device is powered by an external power supply. Before connecting the external power supply, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC outlet is protected by a residual cur‐ rent circuit breaker.
- Page 9 Safety instructions NOTICE! Possible damage by leaking batteries Leaking batteries can cause permanent damage to the device. Take batteries out of the device if it is not going to be used for a longer period. BOD-1...
-
Page 10: Features
Features Features Bass overdrive floor effects pedal, designed for bass guitar Creates various effects from ‘fat’ overdrive to high gain fuzz Numerous setting options Voltage supply by 9 V battery or power adaptor Robust metal housing effects pedal... -
Page 11: Instructions For Use
Handle the device with care. Do not try to disassemble or repair the device yourself in the unlikely event that it does not work. Do not use solvents such as alcohol to clean the device. BOD-1... -
Page 12: Components And Functions
Components and functions Components and functions ö 1 Connector for an optional 9 V power adaptor. If a 9 V power adaptor is used, the battery is automatically disconnected from the circuitry. 2 CHECK The LED "CHECK" lights up when the effects pedal is active. If the LED is not lit or &... - Page 13 Adjusts the output level of the device. 10 EQ (LO) Tone control for low frequencies. 11 EQ (HI) Tone control for high frequencies. Establish all connections as long as the unit is switched off. Use the shortest possible high- quality cables for all connections. BOD-1...
- Page 14 Components and functions Power supply You can use either a DC-9-V power adapter for 230V mains operation or a 9-V battery. Before connecting check for correct polarity. When you do not use the pedal, disconnect the power adapter from the mains socket. Unplug the guitar cable from the input jack as the battery will become discharged.
- Page 15 Before installing or replacing the battery disconnect the power adaptor from the wall outlet. Loosen the knurled-head screw (7) on the pedal to open it. Take the 9 V battery out of the battery compartment (18) and pull off the battery clip (15) from the empty battery. BOD-1...
- Page 16 Components and functions Put the battery clip (15) on the new battery (respecting the pole marking) and put it into the battery compartment (18). Make sure that the battery cable (14) is not trapped in the coil spring (13) or the pedal cover. Press the coil spring (13) into the spring suspension (12) and close the pedal switch (7).
-
Page 17: Technical Specifications
1 kΩ Recommended load impedance ≥10 kΩ Current draw 15 mA Operating voltage supply 9 V battery (6F22) / 9 V power adaptor Dimensions (W × H × D) 72 mm × 128 mm × 60 mm Weight 403 g BOD-1... -
Page 18: Protecting The Environment
Protecting the environment Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose these materials with your normal household waste, but make sure that they are fed to a recovery. - Page 19 Batteries must not be disposed of as domestic waste or thrown into fire. Dispose of the bat‐ teries according to national or local regulations regarding hazardous waste. To protect the environment, dispose of empty batteries at your retail store or at appropriate collection sites. BOD-1...
- Page 20 Notes effects pedal...
- Page 21 Notes BOD-1...
- Page 22 Notes effects pedal...
- Page 24 Musikhaus Thomann e.K. · Treppendorf 30 · 96138 Burgebrach · Germany · www.thomann.de...