Table of Contents
Advertisement
a5 Store points by orientation
Yes
Off
a6 AF activation
Shutter/AF-ON
AF-ON only
a7 Focus point wrap-around
Wrap
No wrap
a8 Focus point options
Focus point illumination
Manual focus mode
a9 Built-in AF-assist illuminator
On
Off
a10 Manual focus ring in AF mode
Enable
Disable
b Metering/exposure
b1 ISO sensitivity step value
1/3 step
1/2 step
Choose whether the viewfinder stores
the focus points for vertical and
horizontal orientations separately.
Choose whether the camera focuses
when the shutter-release button is
pressed halfway. If AF-ON only is
selected, the camera will not focus
when the shutter-release button is
pressed halfway.
Choose whether viewfinder focus-point
selection "wraps around" from one
edge of the display to another.
Adjust settings for the focus-point
display in the viewfinder.
Choose whether the built-in AF-assist
illuminator lights to assist the focus
operation when lighting is poor.
This option is available with compatible
lenses. Select Disable to disable focus
using the focus ring in autofocus mode.
Select the increments used when
making adjustments to ISO sensitivity.
(defaults to Off)
(defaults to Shutter/AF-ON)
(defaults to No wrap)
(defaults to On)
(defaults to Enable)
(defaults to 1/3 step)
261
Advertisement
Table of Contents
