Table of Contents
Advertisement
Caring for the Camera
Storage
When the camera will not be used for an extended period,
remove the battery and store it in a cool, dry area with the
terminal cover in place. To prevent mold or mildew, store the
camera in a dry, well-ventilated area. Do not store your camera
with naphtha or camphor moth balls or in locations that:
• are poorly ventilated or subject to humidities of over 60%
• are next to equipment that produces strong electromagnetic
fields, such as televisions or radios
• are exposed to temperatures above 50 °C (122 °F) or below
–10 °C (14 °F)
Cleaning
Camera
body
Lens, mirror,
and
viewfinder
Monitor
Do not use alcohol, thinner, or other volatile chemicals.
288
Use a blower to remove dust and lint, then wipe gently with
a soft, dry cloth. After using the camera at the beach or
seaside, wipe off sand or salt with a cloth lightly dampened
in distilled water and dry thoroughly. Important: Dust or
other foreign matter inside the camera may cause damage
not covered under warranty.
These glass elements are easily damaged. Remove dust
and lint with a blower. If using an aerosol blower, keep the
can vertical to prevent the discharge of liquid. To remove
fingerprints and other stains, apply a small amount of lens
cleaner to a soft cloth and clean with care.
Remove dust and lint with a blower. When removing
fingerprints and other stains, wipe the surface lightly with a
soft cloth or chamois leather. Do not apply pressure, as this
could result in damage or malfunction.
Advertisement
Table of Contents
