Sony PBD-D50 Operating Instruction page 17

Note
Make sure to restart your
PC after installing. If not,
this unit may not work as
the DVD-ROM drive.
Note
Make sure to restart your
PC after installing. If not,
this unit may not work as
the DVD-ROM drive.
If the "New Hardware" does not appear
The PC card device driver on your PC does not work or the
PC card device is not set to use the 32 bit support.
1 Double click the "PC card (PCMCIA)" icon on the
Control Panel.
"PC card (PCMCIA) wizard" appears.
2 Follow the instructions on the screen.
3 When it finishes, restart your PC, then follow the
instructions of "Installing the SCSI Miniport Driver."
Installing the DVD driver
1
Click "Start," then set the pointer to "Settings" and
click "Control Panel."
2
Double click "Add/Remove Program Properties,"
then click "Setup."
The "Install Program From Floppy Disk or CD-
ROM" window appears.
3
Insert the supplied install disk into the floppy disk
drive of your PC, then click "Next."
4
Enter "A:\DVD\Setup.exe" on "Command line for
installation program:," then click "Finish."
5
Follow the instructions on the screen to continue
installation.
6
When installation finishes, remove the install disk,
then restart your PC.
Reinstalling the ASPI manager
For smooth operation when using this unit with other
SCSI units are also connected, reinstalling the ASPI
manager is highly recommended.
1
Follow Steps 1 to 3 in "Installing the DVD driver."
2
Enter "A:\WIN95\Setup32.exe" on "Command
line for installation program:," then click "Finish."
3
Follow the instructions on the screen to continue
installation.
4
When installation is complete, remove the install
disk, then restart your PC.
Go to "4 Checking if installation is complete."
17