Play From Bluetooth Devices; Connect A Device; Disconnect A Device - Philips 2AANUBT50 User Manual

4 Play from
Bluetooth
devices
With this speaker, you can listen to audio from
Bluetooth-enabled devices.
Note
‡
The speaker can memorize a maximum of four paired
GHYLFHV 7KH ÀIWK SDLUHG GHYLFH ZLOO UHSODFH WKH ÀUVW RQH
‡
Any obstacle between this speaker and a Bluetooth
device can reduce the operational range.
‡
Keep away from any other electronic device that may
cause interference.
‡
The operational range between this speaker and a
Bluetooth device is approximately 10 meters (30 feet).
‡
Make sure that no audio input cable is connected to
the AUDIO IN socket.

Connect a device

1
Slide the source selector to .
» 7KH /(' LQGLFDWRU ÁDVKHV EOXH
2
On your Bluetooth device, enable
Bluetooth and search for Bluetooth devices
that can be paired (refer to the user
manual of the device).
3
Select [Philips BT50] displayed on your
device for pairing and connection. If
necessary, input "0000" as the pairing
password.
» After successful pairing and connection,
the speaker beeps twice, and the LED
indicator turns solid blue.
‡ ,I \RX FDQQRW ÀQG [Philips BT50] on
your device, press and hold PAIRING
for more than three seconds until you
hear triple beeps.
4
Play audio on the Bluetooth device.
Tip
‡
You can use your Bluetooth device to control play.
/(' LQGLFDWRU EOXH
Indicator Bluetooth connection status
Fast Pairing
ÁDVKLQJ
(2Hz)
Slow Connecting
ÁDVKLQJ
(1Hz)
Solid blue Connected

Disconnect a device

‡ Press and hold PAIRING for more than
three seconds;
» The speaker beeps for three times.
‡ Disable Bluetooth on your device; or
‡ Move the device beyond the
communication range.
» The speaker beeps twice, and the LED
LQGLFDWRU ÁDVKHV EOXH
EN 5