Get Started; Charge The Built-In Battery; Turn On/Off; Switch To Standby Mode - Philips 2AANUBT50 User Manual

3 Get started

Always follow the instructions in this chapter in
sequence.

Charge the built-in battery

The speaker is powered by a built-in
rechargeable battery.
Note
‡
Before use, fully charge the built-in battery.
‡
The micro USB socket is for charging only.
‡
It takes you approximately two hours to fully charge
the battery.
‡
Rechargeable battery has a limited number of charge
cycles. Battery life and number of charge cycles vary by
use and settings.
Connect the USB cable between
‡ the DC IN socket on the speaker, and
‡ a USB socket on a computer.
The LED indicator indicates the battery status.
Under charging
4 EN
"OFF"
mode
"AUDIO
IN" mode
"Bluetooth"
mode

Turn on/off

‡
‡

Switch to standby mode

The speaker switches to standby mode
automatically in the following situations:
‡
Fully
‡
charged
Flashing white
Flashing white
Flashing blue
or solid blue
(depending
on Bluetooth
connection
status)
To turn the speaker on, slide the source
selector to AUDIO IN or .
To turn the speaker off, slide the source
selector to OFF.
In Bluetooth mode, the connection with
Bluetooth device is invalid for 15 minutes;
or
In AUDIO IN mode, no audio input cable
is connected for 15 minutes.
Off
Solid white
Flashing
blue or
solid blue
(depending
on
Bluetooth
connection
status)