Table of Contents
Advertisement
Results
If you are running the
instrument via a direct
connection or over a LAN
simply click the "Results" tab
to view the results.
If you are running the instrument direct from a USB drive,
the results will be stored as a .USB file on the USB drive.
This can be opened in the software on your Mac or PC.
Insert the USB in to your Mac/PC. Open the genesig q16
software and click "Open" then change the 'Files of Type'
selection (underneath the file name) from 'Experiment
File (.ppf)' to 'genesig q16 Data File (.USB).
Your USB run will now be viewable in the appropriate
folder (the first USB run is typically named 'PCR01.
USB')."
24
Advertisement
Table of Contents
